|Just Synthetics: New Products
This page gives you up-to-date information on new products that AMSOIL has introduced. You are encouraged to check this page frequently to learn of the newest products available. Click on the picture of each product for more information and the AMSOIL On-Line Store, where the product can be ordered if desired.
While two-stroke engines are widely used in handheld power equipment due to their high power-to-weight ratio, equipment owners and operators are faced with exhaust smoke, the task of properly mixing oil and gas for different equipment manufacturers, and premature wear and engine failure. AMSOIL SABER® Professional Synthetic 2-Stroke Oil effectively addresses these issues and more. Specially formulated for pre-mix, air-cooled applications, it withstands high heat and stress to protect engines against wear and harmful deposits. SABER Professional offers outstanding protection and performance at lean mix ratios referred to as the SABER Ratio™. Using the SABER Ratio eliminates the need for mixing different ratios for different equipment, while smoke is virtually undetectable. With AMSOIL SABER Professional, there is no compromise. It saves time and money while delivering the ultimate convenience and engine protection.
AMSOIL Synthetic 2-Stroke Oil has been providing improved performance and protection in two-stroke engines since 1973. Trust the extensive experience of AMSOIL, The First in Synthetics®, to do the best job protecting your engine.
SABER Professional has been tested and proven to provide premium protection and performance at 100:1 mix ratios. It is recommended for any mix ratio up to 100:1. When tested at half the treat rate for conventional oils (100:1 vs. 50:1), SABER Professional easily passed the industry-standard lubricity test. SABER Professional is designed for hot-operating two-stroke engines, effectively fighting carbon/deposit formation and preventing ring sticking.
SABER Professional's synthetic formulation burns clean, passing the industry-standard smoke test at the standard rich mix ratio. When mixed at the SABER Ratio, smoke is virtually undetectable. Equipment operators subjected to smoke and fumes benefit from these low-emission properties.
SABER Professional provides the additional benefit of fuel stabilization to help prevent fuel from deteriorating during storage and causing poor engine performance. There is no need to add an additional fuel stabilizer when putting equipment into seasonal storage.
Go to the On-Line Store for Saber 2-Stroke Oil by clicking here
Degraded fuel presents a major maintenance issue in small engines and powersports equipment. It can form varnish, gum and insoluble debris that clog carburetors, fuel injectors and fuel filters. Carbon buildup can form on the tops of pistons that leads to pre-ignition, rough idling and poor throttle response. Fuel-related problems are only expected to intensify in the coming years as the ethanol content in pump gasoline continues to increase.
AMSOIL Quickshot SE (AQS) is a premium fuel additive formulated to thoroughly clean and restore peak performance in small engine and powersports equipment fuel systems. It also stabilizes fuel between uses and during short-term storage periods. Its revolutionary technology focuses on three major fuel-related issues plaguing small engines and powersports equipment: ethanol, water and dirty pump gas.
Ethanol in fuel has a tendency to absorb water and separate from the gasoline, sinking to the bottom of the gas tank, where it quickly degrades and creates gum, varnish and other insoluble debris that can plug fuel flow passages and negatively affect engine performance. When this ethanol/water mixture is pulled
into the engine, it creates a lean burn situation that increases combustion chamber temperatures and can lead to engine damage. AMSOIL Quickshot SE is designed to keep water dispersed throughout the tank, moving it out as a normal part of operation and decreasing the chance of ethanol separating from the gasoline.
Quickshot SE was tested in fuel containing 10 percent ethanol. Controlled plugging of injectors showed a 70 percent flow improvement, while oxidation stability improved 44 percent over untreated fuel.
Water finds its way into gas tanks through condensation in tanks open to the atmosphere, gas pumps and other environmental conditions, and if left untreated, will cause a myriad of starting, performance and corrosion problems. By keeping water dispersed in tiny molecules and safely moving it out of the tank through the combustion chamber, Quickshot SE helps maintain engine performance and protects against damaging corrosion.
Dirty gasoline causes fuel system gumming and varnish, as well as piston and combustion chamber deposits. Although all gasoline sold in the U.S. is formulated with a lowest additive concentration (LAC) level of detergent additives, these detergent levels are not enough to prevent deposits from building up on critical fuel system components. Quickshot SE contains unique chemistry that quickly detaches and carries away deposits and buildups in fuel systems, injectors and carburetors, while also cleaning hard-to-remove deposits on piston tops, spark plugs and other combustion chamber parts.
Quickshot SE is recommended for use in all two- and four-stroke gasoline-powered engines, including motorcycles, snowmobiles, boats, personal watercraft, ATVs, edgers, tillers, mowers, snowblowers, chainsaws, generators and farm and construction equipment. However, AMSOIL P.i. Performance Improver is the superior choice for passenger vehicle applications.
Quickshot SE is designed for an initial clean-up dose of 8 oz. per 6 gallons of gasoline, followed by 8 oz. per 12 gallons thereafter
Go to the On-Line Store for Quickshot SE by clicking here
Series 500 High-Performance
DOT 3 Brake Fluid
AMSOIL now offers Series 500 High-Performance DOT 3 Brake Fluid. AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications.
AMSOIL Series 500 High-Performance DOT 3 Brake Fluid is formulated with the best zinc-based anti-corrosion additives and pH stabilizers. It is designed for high-temperature stability, yet flows easily at low temperatures. AMSOIL Series 500 High-Performance DOT 3 Brake Fluid's superirior additive package provides good lubrication throughout the system and can raise boiling points to more than 232°C (450°F). It keeps water in suspension, slowing its effects on the brake system. AMSOIL Brake Fluids have high boiling temperatures, ensuring maximum life and reliable braking power, even in extreme conditions.
Series 600 DOT 4 Racing Brake Fluid
AMSOIL Brake Fluids provide superior high-temperature performance
High-temperature performance in auto/light-truck, high-performance, racing and powersports applications. High-temperature stability, yet flows easily at low temperatures. Helps keep water in suspension, slowing its effects on the brake system. High boiling temperatures ensure maximum life and reliable braking power.
To the On-Line Store for Series 500 or Series 60 Brake Fluid, click on the appropriate picture above
New Severe Gear Viscosities Expand Spectrum of Gear Lube Applications
SAE 190 Gear Lube
AMSOIL has announced the addition of SAE 190 and SAE 250 Severe Gear Synthetic Gear Lubes to its powerful line of AMSOIL Severe Gear Extreme Pressure Synthetic Gear Lubes. AMSOIL gear lubes feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. They are engineered to protect gears better than conventional gear oils, resisting acid, carbon and varnish formation, oxidative breakdown and thermal runaway.
These two new viscosities have been specially engineered for severe differential applications including off-road and drag racing, and rock crawling. Their tenacious formulation clings to gear surfaces to prevent gear wear in extreme conditions.
SAE 250 Gear Lube
Click on either image above to be taken to the On-Line Store for that product.
Severe Gear SAE 75W-110
AMSOIL INC. of Superior, WI has announced the addition of 75W-110 Severe Gear Synthetic Gear Lube to its strong line of AMSOIL Severe Gear Extreme Pressure Synthetic Gear Lubes. AMSOIL Severe Gear Synthetic Gear Lubes feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. They are engineered to protect gears better than conventional gear oils, resisting acid, carbon and varnish formation and oxidative breakdown.
The new viscosity gear lube grade that fills the gap between the 75W-90 and 75W-140 viscosity gear lubes that most people are accustomed to using. Many used the 75W-140 to obtain extra film protection beyond what the 75W-90 viscosity grade offered for their differentials, but found that they sacrificed fuel economy by doing so. This new viscosity grade, 75W-110, offers a high temperature film protection beyond what a 75W-90 offers, without compromising fuel economy. This new mid-range viscosity grade for gear lubes addresses performance, protection and fuel economy.
Click on either here or on image above to be taken to the On-Line Store for this product
4-Stroke Small Engine Oil
A commercial grade formulation designed for hot temperature, severe service operation of small engines where routine maintenance is often difficult or infrequent. Recommended for use wherever SAE 10W-30 or SAE 30 oil is specified in gasoline or diesel engines, transmissions, hydraulics, and chain cases requiring the listed specifications. Applications include maintenance equipment, tractors, lawn and garden equipment, generators, compactors, pumps, light towers, welders, log splitters, power washers, cement mixers and trowels, skid-steers, excavators and compressors.
AMSOIL Formula 4-Stroke® Small Engine Oil is recommended for use wherever SAE 10W-30 or SAE 30 oil is specified in gasoline or diesel engines, transmissions, hydraulics and chain cases that require the following:
- API SL, SJ, SH, SG...(Gasoline)
- API CF, CD (Diesel)
- JASO MA (Motorcycle Wet Clutch)
Engine manufacturers include - Briggs & Stratton, Kohler, Honda, Tecumseh, Robin, Kawasaki, Onan, Kubota, Yanmar, Wisconsin, Power Train, Vanguard and Linemar.
Equipment brands include - Toro, Ariens, Sears Craftsman, John Deere, MTD, Bolens, Dixie Chopper, Yard-Man, Coleman, Murry, Troy-Bilt, Ex-Cell Generac, Snapper, Simplicity, Ingersoll, Wheel Horse, Homelite, Porter Cable, Devilbass, Poulan, Cambell, Hausfeld, Massey Ferguson, Thomas, Bobcat, Kubota, New Holland and Caterpillar.
Applications include - Maintenance equipment, tractors, lawn and garden equipment, generators, compactors, pumps, light towers, log splitters, welders, power washers, cement mixers and trowels, skid-steers, excavators and compressor.
Click on either here or on image above to be taken to the On-Line Store for this product
European Forumua 5W-40 Oil
AMSOIL European Car Formula 5W-40 100% Synthetic Motor Oil has been reformulated for all applications requiring VW 505.01, Mercedes-Benz 229.51 and BMW LL-04 specifications. AMSOIL European Car Formula 5W-40, engineered with advanced AMSOIL synthetic technology, is the only motor oil in North America to be recommended for the latest specifications of all three major European automakers – Volkswagen (Audi), BMW and Mercedes-Benz, and the latest North American API specification. AMSOIL European Car Formula 5W-40 is highly versatile for multiple applications and provides second-to-none protection and performance in the most demanding operating conditions.
The reformulated AMSOIL Synthetic European Car Formula 5W-40 Motor Oil provides the following features and benefits:
Offers advanced protection for major European gasoline and diesel passenger vehicles.
Engineered for turbo direct injection (TDI) vehicles, including the Volkswagen Jetta, Passat, Golf, Beetle and Audi A3, A4, A6 and A8 models
Provides maximum protection for today's smaller, high RPM engines.
Designed for maximum extended drain intervals established by European car manufacturers.
Formulated to exceed API SM/CF requirements for North American vehicles.
AMSOIL Synthetic 5W-40 European Car Formula Motor Oil surpasses the most demanding European oil specifications. It is recommended for European gasoline and diesel vehicles, including but not limited to, Saab, Audi, Volkswagen, Mercedes-Benz, Volvo, Land Rover, Mini Cooper, BMW and Porsche.
Absolute Efficiency Oil Filter
The best efficiency rating in the industry.
AMSOIL Ea Oil Filters have the best efficiency rating in the industry. EaO Filters provide a filtering efficiency in accordance with industry standard ISO 4548-12 of 98.7 percent at 15 microns, while competitive filters containing conventional cellulose medias range from 40 to 80 percent efficiency.
AMSOIL Ea Oil Filters have significantly lower restriction than conventional cellulose media filters. Their small synthetic nanofibers trap smaller particles and hold more contaminants, resulting in lower restriction. During cold temperature warm-up periods, an EaO lube filter allows the oil to easily flow through the filter compared to a typical cellulose filter. Lower restriction decreases engine wear.
A filter's capacity refers to the amount of contaminants it can hold and still remain effective. AMSOIL EaO Filters have a far greater capacity than competing filter lines. When used in conjunction with AMSOIL synthetic motor oils in normal service, EaO Filters are guaranteed to remain effective for 25,000 miles or one year, whichever comes first.
AMSOIL Ea Oil Filters are made with premium-grade full synthetic media. The strictly controlled processing of this media ensures accurate filter construction, and is what allows Ea Oil Filters to deliver higher capacity and efficiency along with better durability.
Over the service life of a conventional cellulose filter, hot oil will degrade the resins that bind the media. EaO Filters' full synthetic media technology uses a wire screen backing that is pleated with the media for superior strength.
Ea Oil Filters are constructed with HNBR nitrile gaskets that are fully tested to extreme distances in numerous severe environments. The filters also feature fully tucked seams, a molded element seal, roll-formed threads and a long-lasting premium-grade silicone anti-drain valve.
EaBP By-Pass Filters
The new Ea By-Pass Oil Filter (EaBP) provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine's full-flow oil filter, the AMSOIL Ea By-Pass Filter operates by filtering oil on a "partial-flow" basis. It draws approximately 10 percent of the oil pump's capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can't remove. The AMSOIL Ea Bypass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ filter, the EaBP should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.
Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.
For a Data Sheet on the EaBP Oil filters click on the picture above, or click here
Synthetic 0W-20 Motor Oil
AMSOIL 100% Synthetic 0W-20 Motor Oil (ASM) delivers extraordinary lubrication for automotive gasoline engines. AMSOIL combined the industry premier synthetic technology and additives into a light viscosity formulation that withstands high temperatures and delivers outstanding fuel economy and cold temperature performance. AMSOIL ASM replaces SAE 5W-20 and is recommended for extended drain intervals according to AMSOIL service interval guidelines. It delivers long-lasting performance and protection.
AMSOIL, the leader in automotive synthetic lubrication, produced the world’s first API-qualified synthetic motor oil in 1972. Trust the extensive experience of AMSOIL “The First in Synthetics” to do the best job protecting your engine.
Extends Drain Intervals
AMSOIL Synthetic 0W-20 Motor Oil can extend drain intervals far beyond those recommended for conventional oils. Its unique synthetic formulation and long drain additive system are very stable, resisting oxidation and neutralizing acids. AMSOIL ASM delivers the best possible engine protection, cleanliness and performance over extended drain intervals, reducing vehicle maintenance and waste oil disposal costs.
Maximizes Fuel Economy
AMSOIL Synthetic 0W-20 Motor Oil is designed to maximize energy efficiency for improved fuel economy. Its light viscosity properties reduce drag and its uniform molecular structure helps it flow more freely to lower friction between metal surfaces. Anti-friction additives are included to further improve energy efficiency.
Protects Against Wear
AMSOIL Synthetic 0W-20 Motor Oil is a shear stable formulation with a high viscosity index. It provides excellent viscosity film strength to separate metal surfaces and contains robust anti-wear additives for the best possible engine protection.
Reduces Oil Consumption and Emissions
Volatility (burn-off) occurs when oil gets hot, causing high oil consumption and emissions. AMSOIL Synthetic 0W-20 Motor Oil has a very low volatility rate, making it excellent at controlling volatility related oil consumption and emissions.
Excels in Extreme Temperatures
AMSOIL Synthetic 0W-20 Motor Oil resists thermal breakdown better than conventional oils. It is heavily fortified with detergent and dispersant additives to prevent sludge deposits and keep engines clean. And unlike conventional oils, AMSOIL ASM contains no wax. It stays fluid down to -65°F for improved cold temperature oil flow, reduced bearing wear and easier starting.
AMSOIL Synthetic 0W-20 Motor Oil is recommended for Honda, Acura, DaimlerChrysler, Toyota, Ford and all other applications where SAE 0W-20 or 5W-20 is required with the following specifications:
- API SM/CF, SL, SJ
- ILSAC GF-4, 3
- ACEA A1/B1
- Ford WSS-M2C930-A
- DaimlerChrysler MS-6395N